|
INPUT SPECIFICATIONS:
|
|
Voltage …....………........…............................................... 90~264Vac
|
|
Frequency ………………………………………………………..... 47 to 63Hz
|
|
Inrush Current ………………….…………...................... 75A max. @240Vac
|
|
Input Current ……….………………. 100Vac/1.6A max., 240Vac/0.8Amax.
|
|
Leakage Current ……………………………………….…...…… 100uA max.
|
|
OUTPUT SPECIFICATIONS:
|
|
Holdup Time …………………………..……………….… 16ms typ. @115Vac
|
|
Short Circuit Protection …………….....…... Hiccup Mode (Auto Recover)
|
|
Over Voltage Protection ………………...…….... TVS Component to Clamp
|
|
Temperature Coefficient ……………………............................... ±0.05%/℃
|
|
GENERAL SPECIFICATIONS:
|
SAFETY AND EMC:
|
|
Isolation ……………………..……………..…… Input to output = 5,656VDC
|
Emission and Immunity ……….. EN55011 Class B, FCC CFR 47 Part 18
|
|
Operating Temperature .......................... -20 ~ 50℃℃ (see Derating Curve)
|
EN60601-1-2, EN61000-3-2, EN61000-3-3
|
|
Storage Temperature …………………………....….......…........ -20~85℃℃
|
Safety ……………………….……… IEC60601-1, EN60601-1, UL60601-1
|
|
Humidity ..................................................... 93% RH max. Non-Condensing
|
NOTE:
|
|
Cooling ………………………..…………………..……..... Natural Convection
|
1. Voltage accuracy is set at full load.
|
|
Switching Frequency …………………………………….……. 65KHz Typical
|
2. Add a 0.1uF ceramic capacitor and a 10uF E.L. capacitor to output for
|
|
MTBF ……………….… MIL-HDBK-217F, GB, 25℃/115VAC …… T.B.D hrs
|
Ripple & Noise measuring @20MHz BW.
|
|
Altitude ……………………..……………………….…………………… 3000m
|
3. Line regulation is measured from 100Vac to 240Vac with full load.
|
|
Dimensions ……….….. 4.000x2.000x1.100inches (101.6x50.8x27.94mm)
|
4. Load regulation is measured from 10% to 100% full load.
|
